Note: Make sure the Minto is turned on before pressing the key combinations below.
Turn on/off the purple charging light
Press and hold the Bluetooth and power buttons. A confirmation tone is played when the command is successfully executed.
Select voice feedback language
Press and hold Vol- and Vol+. A confirmation tone is played when the command is successfully executed. Browse through the available languages using the Vol- or Vol+ buttons. When hearing the language you want, wait for four seconds and the setting is saved.
Language settings can only be edited when no audio session is active.
Activate Bluetooth auto-pairing
Press and hold the Bluetooth button. Then, using the Bluetooth device you would like to pair, select the Minto in its list of available Bluetooth devices. Once you get a confirmation from the Minto that pairing is completed and the halo turns blue, save the Bluetooth pairing by pressing and holding the Vol+ and Bluetooth buttons. A confirmation tone is played when the command is successfully executed.
Deactivate Bluetooth auto-pairing
To remove auto-pairing, first make sure the Minto is off, and the auto-paired device is out of range or has Bluetooth turned off. Then turn on the Minto, and while it is trying to auto-pair (blue halo is blinking), press and hold the Bluetooth and Vol+ buttons. Once the auto-pairing is turned off, a confirmation tone will be played.