The Evoko Liso system is compatible with the popular RFID technology, which makes handling your meetings on the Liso a lot quicker. Just present the card in front of the Liso instead of using your PIN.
- Prerequisites and compatibility
- Evoko Home RFID Settings
- RFID Enrollment settings
- Video demonstration
Prerequisites and compatibility
- Evoko Home > v1.26
- Evoko Liso firmware > v1.26
- System running in default mode (Limited mode is not supported).
The Evoko Liso is can be used with 13.56 MHz cards compatible with ISO/IEC 14443A/B, for example the MIFARE classic 4K/1K card.
ISO/IEC 15693 or MIFARE Ultralight C cards are not compatible.
Evoko Home RFID Settings
To enable RFID authentication, open Evoko Home in a web browser and head to the Global Settings. On the left hand side, you will see the options for RFID:
This sets whether users are able to identify themselves using PIN only or PIN and RFID. To enable RFID, set this option to "PIN or RFID".
RFID Enrollment settings
This option controls how users can enroll their RFID into Evoko Home.
Auto - This means a user can present their RFID to a Liso at any time, then enter their PIN to associate the RFID with their Evoko Home user account.
Admin - This means the admin must import or enter the RFID into Evoko Home. No enrollment from the Liso.
Requested - This option is like Auto but with the addition that an Evoko Home admin must aprove the RFID in Evoko Home. This is shown by a red exclamation mark in the users list. When the admin edits the user a request to replace the RFID is shown.
Please see the video below for a demonstration on how to enroll an RFID card.